Price List

We provide a wide range of professional services to meet your needs.

We promise to provide every service with a smile, and to your highest level of satisfaction.

Model #DB-612 DLX — equipped with one 6" dia. x 7" wide pneumatic drum, one #B-12 brush head, and the 3/4 H.P. single phase motor - $1,229.00

Model #Sand-Rite DUO-DLX Motor3/4 H.P. single phase - $846.00

Note: Sand-Rite Duo-Dlx is available with any combination of sanding heads.

Sand-Rite Optional Cast Iron Stand (making floor model) - $308.00

Note: Sand-Rite Duo-Dlx is available with any combination of sanding heads.

Sand-Rite pneumatic pump drum sander canvas sleeves protect the inner tube.

Model DUO-DLX — less sanding heads with 3/4 H.P. single phase motor

DUO-DLX — 3/4 H.P. single phase motor

DUO-DLX Motor*.........................................................$1048.00

3/4 HP single phase

*Pneumatic sanding drums are optional in five diameters, 2" to 8". Operator regulated inflated drum conforms abrasive sleeve to contoured work. See Pneumatic Sanding Drums listed below for sizes and prices to order.

*B-12 fully-loaded brush head is also optional. Available in 60, 80, 100, 120, 150, 180 or 220 grit. $175.00 Specify grit when ordering.

DB-612-DLX 3/4 H.P. single phase motor with Pneumatic Drum/Brush Head Sander

DB-612-DLX.............................................$1535.00

Equipped with one 6" diameter x 7" wide pneumatic drum

One #B-12 full-loaded brush head (60, 80, 100, 120, 150, 180, or 220 grit)

and the 3/4 H.P. single phase motor.

Two wrenches are required and not included.

Model #DB-612 DLX — equipped with 6" dia. x 7" wide pneumatic drum & #B-12 brush head, and 3/4 H.P. single phase motor - $1,229.00

Model #Sand-Rite DUO-DLX — less sanding heads with 3/4 H.P. single phase motor - $846.00

Sand-Rite Optional Cast Iron Stand (making floor model) - $308.00

Note: Sand-Rite Duo-Dlx is available with any combination of sanding heads.

Portable Touch-Up Sanders

Model #PD-16 (1" dia. x 6" wide) - $324.00

Model #PD-156 (112" dia. x 6" wide) - 348.00

Model #PD-28 (2" dia. x 8" wide) - 354.00

Model #PD-39 (3" dia. x 9" wide) - 384.00

#DL051B-33-P Aro Air Tool - 748.00

All the above sleeves are resin bond Aluminum Oxide cloth/J wt.
In stock - Grit #’s 60, 80, 100, 120, 150.
Minimum order—(10) each size, each grit #.
Coarser & finer grits are available on special order—prices vary.
All special orders are non-returnable and non-refundable.

Sand-Rite Cast Iron Stand (Optional)

Cast Iron Stand (making floor model)......$480

Note: Sand-Rite Duo-Dlx is available with any combination of sanding heads.

Portable Touch-Up Sanders

Model PD-16......(1" dia. x 6" wide)......$320.00

Model PD-28......(2" dia. x 8" wide)......$380.00

Model PD-39......(3" dia. x 9" wide)......$415

Ingersoll Rand DL051B-15-A Tool..........$662

Includes a 3/8" adapter for use with drill chucks.

This tool can also be driven directly off the 3/8" x 24 output shaft on inline drills.

The Ingersoll Rand DL051B-15-A is a 1500 rpm inline drill with 33.6 in lbs of torque, this is truly an industrial quality tool built in the U.S.A. and designed to provide years of trouble free service.

Flex Sand 1" Pneumatic Drum Sander with Drill Press Attachment

Sanding tool and bearing base..............$248.00

• Tool length 9"

• Sanding length 6" with 1" diameter 3/8" shank

• Includes sanding tool and 3/4" x 5" x 3 1/2" bearing support plate

• Heavy duty 2" rubber sealed support bearing

• Easy to install, chuck up the tool and the clamp bearing support to drill press table.

• Sanding tool can also be used freehand with a hand-held drill.

• Sand-Rite.com stocks J-weight sandpaper for this and larger sized bladder sanders.

Drill Press Sanding Adapter

Tool shaft and bearing base..............$200

• 1" acme threaded rod with 1/2" shank

• Threaded shaft length 14", 17" overall length.

• Includes 3/4" x 5" x 3 1/2" solid aluminum bearing support plate

• Heavy duty 2" rubber sealed support bearing.

• Easy to install, chuck up the tool and clamp bearing support to drill press table

• Tool shaft can also be mounted on a lathe using a live center and a jawed chuck

• Sand-Rite.com stocks J -weight sandpaper for this and larger sized bladder sanders.

Pneumatic Sanding Drums

Pneumatic 1" Bore 1-1/4" Bore

Sanding Drums

6" dia x 7" wide..........$240.00..........$230.00

4" dia x 7" wide..........$220.00..........$210.00

3" dia x 7" wide..........$175.00..........$165.00

8" dia x 9" wide..........$350.00..........$340.00

6" dia x 9" wide..........$255.00..........$245.00

4" dia x 9" wide..........$215.00..........$205.00

3" dia x 9" wide..........$190.00..........$180.00

2" dia x 8" wide..........$110.00..........Not Available

2" dia x 6" wide..........$110.00..........Not Available

Lathe Adapter Shaft (17" length.....$90.00

• Operator regulated inflated drum conforms abrasive sleeve to contoured work.

• Cast zinc pneumatic drum ends

• Center shafts are high strength and air-tight D.O.M seamless tubing.

• Heavy duty bump free canvas covers hold up to everyday use.

• Standard widths are 7" and 9". Bore size 1 1/4".

• Bushings are stocked to make our drums fit smaller shaft sizes.

Need a custom width drum or canvas cover? We can make it..

Abrasive Sleeves

Quantity Quantity Quantity

1-10 11-20 21+

1" dia. x 6" W.....$3.50.......$3.15..........$2.84

1.5" dia. x 6" W..$3.70.......$3.33..........$3.00

2" dia. x 8" W.....$4.16.......$3.74..........$3.37

3" dia. x 7" W.....$4.57.......$4.11..........$3.70

3" dia. x 9" W.....$5.08.......$4.57..........$4.11

4" dia. x 7" W.....$5.72.......$5.15..........$4.63

4" dia. x 9" W.....$6.93.......$6.24..........$5.61

6" dia. x 7" W.....$6.41.......$5.77..........$5.19

6" dia. x 9" W.....$7.86.......$7.07..........$6.37

8" dia. x 9" W.....$9.94.......$8.95..........$8.05

• All the above sleeves are resin bonded Aluminum Oxide cloth/J wt.
• Extremely durable abrasive on strong highly flexible cloth backs.
• In stock - Grit #’s 60, 80, 100, 120, 150.

Finer & coarser grits available —(10) piece minimum, Call for details.
All special orders are non-returnable and non-refundable.

Rubber Tubes

The rubber tubes we sell are made from long-lasting airtight butyl rubber. We stock the standard size replacement tubes and also sell drum repair kits that include the parts necessary to install a new tube and replace your inflation valve.

Price

8" x 9".......................$40.00

6" x 9".......................$35.00

6" x 7".......................$28.00

4" x 9".......................$24.00

4" x 7".......................$20.00

3" x 9".......................$20.00

3" x 7".......................$18.00

2" x 8".......................$17.00

1.5" x 6"....................$12.00

1" x 6".......................$12.00

Note: Quantity Discounts Are Available. Prices on Request.

Canvas Jackets

The canvas sleeve is provided to protect the rubber tube. We make our canvas covers using heavy canvas and the same lap joints as our sanding sleeves, creating a bump-free permanent joint. Shipped ready to install including the wire to close the ends.

Price

8" x 9"......................$25.00

6" x 9"......................$22.00

6" x 7"......................$20.00

4" x 9"......................$20.00

4" x 7"......................$18.00

3" x 9"......................$19.00

3" x 7"......................$17.00

2" x 8"......................$16.00

2" x 6"......................$15.00

1.5" x 6"...................$14.00

Note: Quantity Discounts Are Available. Prices on Request.